Samsung: All type of
phones (old modeles): NAM
programming: 47*869#
08#9 Test mode: *759#
813580 or 5809540*45680
exit test mode – 02 A-Key:
menu + 0, code 25##
Samsung A500 1. Enter ##
and the 6 digit OTKSL 2.
SERVICE MENU will appear
and 1.Basic will be
highlighted 3. Press OK 4.
Device will display NAM
CDMA/ Phone Number 5.
Enter 10 digit MIN 6. Press
OK (3 times) 7. Display will
return to Service Menu.
Press END. 8.
Programming is complete
Samsung N240 and N400
1. Enter ## and type in the
6 digit OTKSL 2. The display
will show SVC MENU and 1.
Phone Number 3. Press OK
4. Enter the 10 digit MIN and
press OK 5. The display will
show NAM with Home SID
on the second line (Note:
SID is no longer used) 6.
Press OK 7. The display will
return to the SVC MENU 8.
Press END to complete the
programming Samsung
Uproar 1. Press MENU key
2. Enter 9 2 0 3. Enter the
OTKSL 4. At SVC Menu
screen press OK 5. Enter
MIN and press OK 4 times
6. Enter SID (4654) and
press OK 7. Press END key
8. Programming is
complete Samsung N300 1.
Press ## followed by the
OTKSL 2. SVC menu will be
displayed 3. Press 1 for
Phone # 4. Enter the 10
digit MIN and press OK 5.
MIN that was entered will
be displayed press OK 6.
SVC Menu will display press
3 for NAM 7. Enter the 4
digit Home SID press OK 8.
Press END and handset will
power cycle Samsung i300
1. Tap on the Phone Icon
with stylus 2. Press #
907*9#0 ENTER LOCK
should appear on screen 3.
ENTER OTKSL 4. SVC MENU
will appear press 1 5. Enter
10 digit MIN and then press
SAVE 6. Press SAVE again
7. Press 3 and then press
SAVE 6 times 8. Enter the
HOME SID and press SAVE
once 9. Press END key
twice Samsung A400 and
A460 1. Enter ## and
OTKSL 2. Press 1 for Basic
at MENU (1 of Phone #
when using the MSL) 3.
Enter 10 digit MIN and press
OK 4. At 1.Basic Menu press
the END key 5. Handset will
power cycle Samsung
3500 8500 6100 N200 1.
Press MENU 2. Press 6 0
(3500) 8 2 0 (8500/6100/
N200) 3. Enter OTKSL 4.
Press 1 at SVC MENU
Screen 5. Enter MIN and
press OK 6. Press OK 4
times 7. Enter SID (4654)
and press OK 8. Press END
key 9. Programming is
complete
Monday 27 June 2011
